|Topic Review (Newest First)|
|02-03-2020 12:29 PM|
|Steamworks||4 gpm at no more than 3000 psi. No matter what you are going to remove sand from the joints, just use it a an upselling opportunity to re-sand the pavers. I wont clean pavers unless they agree to allow me to re-sand. Keep in mind the extra time it takes to sweep and vacuum the wet sand.|
|06-20-2008 03:06 PM|
Pavers are usually just a colored concrete, so you can pretty much clean them the same way you would clean other concrete surfaces.
One thing to be careful with is to not blow all of the sand out of the groves between the pavers.
If you use a surface cleaner, treat with a bleach solution if needed, and gently rinse, you should be fine.
|03-31-2008 04:43 PM|
pressure for pavers
what pressure or gpm do you guys recomend when pressure washing pavers? pavers are about two years old and there a faded red color.