Cleaning Talk - Professional Cleaning and Restoration Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter · #1 ·
Ok I went and looked at a job today. It's about 1,100 sq ft of black and white tile.It looks like there has never been any wax put on it. So do I have to strip the floor before I wax it or just clean it real good? I thought I might run my floor scrubber over it and just get it clean and then wax it.This will be my first floor like this and I want to make sure it is done right.
 

·
Registered
Joined
·
1 Posts
Stripping Floor/Wax

We use a buffer versus a stripping solution and then apply the wax. Sometimes you have to do several coats and then barnish (high speed barnish)(to give it a high gloss). You also need to give it at least 72 hours before barnishing. So estimate high on these jobs they are usually alot more work/time than folks thinks.

Good Luck.
 
1 - 3 of 3 Posts
Top